|
2020-01-23
4.1.4 (2019-12-19)
- new certificates
- Fix, Update-Panel works >= Mac OS 10.12 (Sierra)
- Fix, move to origin (Home, then move XY moved XY before lowering to move height)
- Fix, Contour-Fill: memory usage reduced to work on computers with less memory (and 64 Bit)
- Fix, Help-Menu: Mail address corrected
4.1.3 (2018-08-29)
- RunTime Panel: display the currently processed project until it is finished (potential crash)
- Layer-Panel: disturbing tool-tip removed
- Fix, Output: potential crash after output
- Fix: possible crash in calculation
- Fix, Cutting: rectangle with negative offset crashed [since 4.1.1]
- Fix, Embedded Commands: don't lift z before sending the commands
- Fix, Output: if user moves machine away from origin (with handheld box), force a safe move to origin
- Fix, Pickout: force recalculation of filling, even if the original layer is off (eye closed)
- Fix, Pickout: force recalculation of pickout for Arc, PolyLine, Rectangle
- Fix, Pickout: don't calculate second filling, if filling is not desired
- Fix, Draw Output: drawing with tool width and approach angle will draw black anyway
- Fix, Update-Panel: display correct version number
- Fix, potential crash on Mac OS Sierra in 32 Bit Mode
4.1.2 (2017-11-22)
- Fix, Draw Output / RunTime: calculation for threads improved
- Fix, Threads: wait with quitting until thread output has finished
- Fix, Licensing: conflict with Run-Time Panel (DataTable) solved
- Fix, CAM-Panel, Layer: copy layer selects all objects on new layer, and removes selection on source layer
- Fix, Camera+Targeting: Console warning removed for 32 Bit QT based frame grabbing
- Fix, Camera+Targeting: huge memory leak fixed [since 4.1.1]
- Fix, DIN-Import: loading of parameters with outdated encodings (like Western)
- Fix, DIN-Import: SM3000 and Excellon import works again [since 4.1.0]
- Fix, DXF-Import: 2nd degree (square) splines added
- Fix, DXF-Import: error handling for splines, negative knots fixed, import tinier splines
- Fix, DXF-Import: use colors of layer, if no graphics color is set in graphics
- Fix, SVG-Import: arcs in path fixed
4.1.1 (2017-07-13)
- Fix, Contour-Fill: issue with very small graphics and end angle fixed
- Memory use optimized, especially when opening lots of files
- Fix, Display Output: improved for relief (draw with Z of center of 3-D line to reduce error)
- Fix, Countersink: default values fixed (t2, step size)
- Fix, Mac OS 10.12, Sierra: immediately remove Alert Panel after tool exchange
- Fix, Aggregate Window: disabled in German 4.1 [since 4.1.0]
- Fix, Threads: halt during output of threads (not possible any more)
- Fix, Contour-Fill: possible array overflow fixed [beta 2]
- Layer-Panel: Icon in "move to layer" button, move and copy in one line [beta 3]
- Panels: aligned to 8 Pix, Color-Wells without second frame, ... [beta 3]
- Fix, Contour-Fill: possible array overflow fixed (one more) [beta 3]
- DXF-Import: support for ATTDEF added
- DXF-Import: positions of certain DXF-Files improved (scale and base point)
- DXF-Import: positions and scale of certain DXF-Files with embedded INSERTs improved
- Transform-Panel: Order changed: rotate Icon before Mix
- Transform-Panel: Move absolute improved (always moves the lower/left corner of graphics to point)
- Transform-Panel, Rotate: rotate single object around selected point [beta 2]
- Fix, Contour: improved, bug fixed [beta 2]
- Fix, DXF-Import: formatting codes of MTEXT improved
- Fix, Memory use optimized
- Fix, Export TIFF: issue with PolyLines fixed
- Fix, color shading: potential issue for radial color shading fixed
- Fix, Save: potential issue when saving empty text (if text improperly finished editing)
- Fix, Punch: issue in certain situations fixed
- Fix, Punch: works for rectangles in certain difficult arrangements
- Fix, Transform-Panel: scale absolute for 0-sized objects
- Fix, Sierra: workaround for saving TIFF images
- Fix, Sierra: Raster contour works on Mac OS 10.12
- Panels: aligned to 8 Pix, Color-Wells without second frame, ... [beta 3]
- Coordinates X/Y, W/H in columns [so far English only] [beta 3]
4.1.0 - (2017-02-13)
- New: RunTime-Panel: display run-time Information / Output Statistics
- New, Layer-Panel: Copy Layer
- New, Diagnosis and Correction of machining quality for bezier curves
Drag Point: miss-aligned handles of curves in paths are snapped to connecting tangent
Curve handles are snapped within snap distance (Preferences).
Outside snap distance a gray line displayes the connecting tangent.
- Display Output: display depth of output with grayscales (Menu: Display->Show Diameter)
- Output (lookAhead): output process is more responsive. lookAhead (#AHE) can be set to values # 255.
- Webs: webs inside groups are applied now
- Webs: webs can be applied on single lines and curves
- Smoothing/Settlement: without a last step, smoothing is applied separately [RELEASE NOTES !]
- Filling: the offset of the filling is now equal to the inset + overlap (but never < 0.01 mm)
- Contour Fill: contour fill always from inside to outside - filling comes before contour [RELEASE NOTES !]
- PCB: postition of BlowUp and RubOut layer can be before or behind Isolation layer
- CAM-Panel: new layer uses name from name field, if usable (same behaviour as inspector)
- CAM Device Configuration: log line number and line of a syntax error (instead of character location)
- icut-Import: import Circle for pattern types "Any" and "Circle" (see Project-Settings->Camera),
otherwise import cross marker
- Thread: allow selection with click by entire radius (not only rim)
- CAM-Panel: Tool Tips added for Layer Pane
- Docu 4.1: erweitert
- Fix, Auto-Switches: improvements without vhf CNC controller
- Fix, Standard Filling: finishing line of path filling could leave a gap in certain situation
- Fix, Contour-Fill: improvement for connecting contour filling to contour
- Fix, Flexible Automation: subpaths are working again
- Fix, Contour-Fill, Camera+Targeting: improved (possible division by zero)
- Fix, Tool-Magazine: removing tool updates assigned tools in projects
- Fix, PickOut: potential division by 0 caught
- Fix, Camera+Targeting: log issues with camera transformation
- Fix, Run-Time: Auto-Switch improved: switching off returns correction to 100%.
Correction calculated after output only
- Fix, Save Output: cancel and stop improved
- Fix, Output: minor fixes of the reference time #RFT [since beta 2]
- Fix, Output Drawing: no grayscales for PickOut [since beta 6]
- New: Zoom with Scroll-Wheel + Command key
Zoom at mouse position by 5% of current scale. Uneven factors show a trailing "+" in Zoom-PopUp
Command+Shift+Scroll zooms in 10% steps [added in b3]
- New, Inspector: copy selection to layer
- DXF-Import: SPLINEs
- DXF-Import: parse font name from text formatting codes
- DXF-Import: skip zero lines
- EPS-Export: scale export to 100%, no matter how the document is scaled
- EPS-Export: Alert of Alpha components in Document and offer automatic fixing
- Document-Window: Tool-Tips added
- Printing: save scale factor of page layout (only available with OS X >= 10.6)
- Inspector: Tool Tips added für Icons on top (English only) and Layer-Inspector
- Font-Editing: einlesen von Fonts reaktiviert
- Import Font: document gets the name of the imported font file
- Expert Mode: if active, the 1st appearance of tool tips is delayed by 3s (you have to restart Cenon)
- Fix, Printing (>= Mac OS 10.8): scale from Print-Settings reenabled (since 4.0.4b4)
- Fix, Move Points: while dragging points, control points stay on top of graphics
- Fix, Move Points: vertical/horicontal constrain with Alternate key (since 4.0.2)
- Tool radius compensation (left, right): inside correction = cutting against rotation (Path)
- Fix, Inspector: moving an object recalculates output paths
- All Fixes from Cenon 4.0.5 and 4.0.6
|